Nixeus NX-VUE30 Manuel d'utilisateur

Nixeus Technology, Inc Nixeus Vue 30 IPS 2560x1600 Monitor(NX-VUE30)

e same steps can also be performed to adjust the vertical placement of the OSD MENU by navigating to the OSD V. POS and adjusting the progress bar.e

BRIGHTNESS Sub-Menu:To adjust the settings in the BRIGHTNESS Sub-Menu, rst press the MENU button bring up the OSD, then press MENU again to access th

1) To adjust the Contrast Ratio, in the BRIGHTNESS Sub-Menu, use the UP/DOWN buttons to navigate to CONTRAST2) en press the MENU button to select CON

Dynamic Contrast Ratio (DCR) can also be adjusted in the BRIGHTNESS Sub-MENU.1) Use the UP/DOWN buttons to navigate to DCR and press the MENU button.2

3) Once you are nished with your adjustments in the BRIGHTNESS Sub-Menu, press AUTO twice to exit out of the OSD.IMAGE Sub-Menu:In the IMAGE Sub-MENU

COLOR TEMP Sub-Menu:1) Press the MENU button to bring up the OSD.2) Use the Up/Down buttons to navigate to COLOR TEMP, then press the MENU button.3) U

Color Temperature Calibration in COLOR TEMP Sub-Menu:NOTE: For accurate color calibration, we recommend using a hardware colorimeter1) In the COLOR TE

MISC Sub-Menu:1) Press the MENU button to bring up the OSD.2) Using the UP/DOWN buttons, browse to the MISC sub-menu and press the MENU button.3) Usin

SIGNAL SOURCE: is setting allows you to change the video signal source to either VGA, DVI, HDMI, or DP. is function can also be accessed without the

AUDIO SELECT: is setting allows you to choose which audio source to transmit sound to the monitors speakers. Select DIGITAL only if you are using a H

Table of Contents1. Important Information 2. Getting Started Box Content Installing Base Stand Input and Connection Ports Power

VOLUME: is setting allows you to adjust the volume setting of the monitors internal speakers.RESET Sub-Menu:1) Press the MENU button to bring up the

Nixeus Technology, Inc. (“Nixeus”) provides this Limited Warranty:•OnlytothepersonorentitythatoriginallypurchasedtheproductfromNixeusor

•AfteranRMAnumberisassigned,thedefective/malfunctioningproductmustbepackagedsecurelyintheoriginal or other suitable shipping package t

Warning: is product contains mercury, a chemical known to cause cancer in the State of California. Please handle with care and dispose of properly.Go

Important InformationImportant Note:Please make sure your computer hardware graphics card supports the Nixeus Vue 30” IPS Monitor. Some devices and co

Avoiding Image Persistence, Incidental Image or After Image:1) When the monitor is on and unattended, please use a moving screen saver. If there is a

5Getting StartedBox Contents:• Nixeus Vue 30” IPS 2560x1600 Monitor (NX-VUE30)• Stand Base x 1 (with 4 screws)• Dual Link DVI-D Cable x 1• Power A

NX-VUE30 Power Cable and Power Supply Switch:Only use the power cable included with the NX-VUE30. Using any other un-authorized power adapters may dam

Monitor Swivel Left/Right:Make sure the NX-VUE30 is on a stable level surface. Holding the left and right bezel with your hand, carefully adjust monit

ON SCREEN DISPLAY (OSD):For the On Screen Display to be visible on the monitor, a video signal must be transmited to the monitor from your PC/MAC. e

3) Next press the “MENU” button to access the Language selection.4) en press the UP or DOWN buttons to highlight your preferred language and press th